How To Fix Windows Installation Errors On RAID Configurations

When installing Windows on a RAID (Redundant Array of Independent Disks) configuration, you may encounter installation errors due to various reasons such as:

• Disk space issues

• RAID type mismatch

• Compatibility problems with the RAID controller

• Incorrect driver installation

Here are some steps to troubleshoot and potentially fix Windows installation errors on a RAID configuration:

Step 1: Check disk space

• Verify that there is enough free space available on your disks.

• If you have a separate partition for the RAID, make sure it’s not occupied by other operating systems or files.

Step 2: Update drivers

• Inspect your RAID controller drivers to ensure they are up-to-date:

* Windows Device Manager (Press Win + X and select Device Manager)

* NVIDIA Control Panel (if using a graphics card with a RAID controller)

• Download and install the latest driver versions from the manufacturer’s website.

Step 3: Disable RAID and set it as primary

• Open Command Prompt as an administrator:

* Press Win + R, type cmd, and press Enter

• Disable the RAID array by setting it as primary:

diskpart

list disk

select disk 0

set part=1,init:complete

exit

RAID Configuration (e.g., IDE, SATA)

• For an IDE-based RAID configuration:

+ Set the RAID level to the desired configuration.

+ Set the boot order to prioritize the RAID device over the system’s primary boot drive.

diskpart

set part=1,init:complete

list partition

select partition 1

set start=1

select partition 2

set start=1

exit

• For a SATA-based RAID configuration:

+ Set the RAID level to the desired configuration.

+ Set the boot order to prioritize the RAID device over the system’s primary boot drive.

diskpart

list disk

select disk 0

set part=1,init:complete

exit

Step 4: Reinstall Windows

If none of the above steps resolve the issue:

• Restart your computer and enter the BIOS setup (usually by pressing F2, F12, or Del).

• Set the RAID configuration to prioritize the RAID device over the system’s primary boot drive.

• Save changes and exit the BIOS setup.

• Reboot your computer and enter the Windows Setup screen.

Step 5: Use the Windows Recovery Environment (Windows RE)

• Press the keys required for Windows RE, depending on your operating system:

* F11 for Windows 8/10

* Esc to open Windows RE

• Follow the prompts in Windows RE to install or repair Windows.

If you’re still experiencing issues after trying these steps:

• Reinstall the RAID controller driver (if necessary)

• Check with the manufacturer’s support resources or visit their website for further assistance

Remember to always back up your data before attempting any system modifications, including installing Windows on a RAID configuration.